VAPOUR PRESSURE AND CAVITATION

VAPOUR PRESSURE AND CAVITATION.

                                 A change from the liquid state to the gaseous state is known as vaporization. The vaporization (which depends upon the prevailing pressure and temperature condition) occurs because of continuous escaping of the molecules through the free liquid surface.
Consider a liquid (say water) which is confined in a closed vessel. Let the temperature of liquid is 20°C and pressure is atmospheric. This liquid will vaporise at 100°C . When vaporization takes place, the molecules escape from the free surface of the liquid. These vapour molecules gets accumulated in the space between the free liquid surface and top of the vessel. These accumulated vapour exert a pressure on the liquid surface. This pressure is known as vapour pressure of the liquid or this is the pressure at which the liquid is converted into vapours.
          Again consider the same liquid at 20°C at atmospheric pressure in the closed vessel. If the pressure above the liquid surface is reduced by some means, the boiling temperature will also reduce. If the pressure is reduced to such an extent that it becomes equal to or less than the vapour pressure, the boiling of the liquid will start, though the temperature of liquid is 20°C. Thus a liquid may boil even at ordinary temperature, if the pressure above the liquid surface is reduced so as to be equal or less than the vapour pressure of the liquid at that temperature.
               Now consider a flowing liquid in a system. If the pressure at any point in this flowing liquid becomes equal to or less than the vapour pressure, the vaporization of the liquid starts. The bubbles of these vapours are carried by the flowing liquid into the region of high pressure where they collapse, giving rise to high impact pressure. The pressure developed by the collapsing bubbles is so high that the material from the adjoining boundaries gets eroded and cavities are formed on them. This phenomenon is known as cavitation.
                       Hence the cavitation is the phenomenon of formation of vapour bubbles of a flowing liquid in a region where the pressure of the liquid falls below the vapour pressure and sudden collapsing of these vapour bubbles in a region of higher pressure. When the vapour bubbles collapse, a very high pressure is created. The metallic surfaces, above which the liquid is flowing, is subjected to these high pressures which cause pitting action on the surface. Thus cavities are formed on the metallic surface and hence the name is cavitation.

                                   The End.

 

          Please comment if you have any query.


Disclaimer : An attempt has been made to make this blog error free. If there is any error, please forgive.
       







                                                           Thank you.